If the selected ID does not exist, the first favorite is selected. Selects a favorite based on its assigned ID number. If the player is turned off, playback will start automatically. Increase volume by value set in parameter (Vsts).ĭecrease volume by value set in parameter (Vsts). Possible uses of the Stereo L and R outputs.Each speaker output can be configured to output either the left or right channel signal, or a downmix of both channels. It is possible to create groups across rooms, providing a uniform music experience in open spaces.įor larger rooms, multiple speaker outputs are assigned to the same Audio Player function block. The block is used with the outputs of the Audioserver or a Stereo Extension. This is usually a room or an area of a building where you would audio playback is desired. With certain devices, the Music Server cannot automatically select the correct settings.With the Audio Player function block you can define an Audio Zone. The default UPnP mode is 0 and the Music Server automatically selects the appropriate settings provided by the UPnP device. If a zone is renamed, this change will be applied for AirPlay and other services at the latest after a reboot of the Music Server.Īlthough UPnP / DLNA is a defined standard, some additional parameters must be considered. To use this block, the corresponding Music Server must be selected here. If the room-off function (input T5, double click on button 3) is detected, the music will also be switched off. If the value is too low, the event playback may be cut off.Īfter the zone has been switched off / paused Minimum playback time of event sounds in seconds. In order to be able to hear the voice output clearly at all times, it is always played back at the current volume level, which may be higher than parameter Vtts. Loxone Music Server Gen 2: TTS minimum volume
Minimum volume level for alarm clock sound Loxone Music Server Gen 2: Alarm clock volume Loxone Music Server Gen 2: Doorbell volume If the zone is currently playing at a higher volume, the sound will be played at the current volume. Minimum volume level for alarm sound (burglar or fire alarm). Volume level for alarm sound (burglar or fire alarm). If set to -1 the zone's last volume is used when switching on. This parameter is only visible in certain configurations. Maximum volume level via App and block inputs If this value is set to 0 then the state of DisMo will be used If this value is 0, automatic shutdown will be disabledĭeactivates Mo input after turning the zone off. If you are using this to turn off music that was accidentally left on, the recommended value is 30 minutes (1800)Īctivates the zone on motion and starts the timer (TH) on the falling edge of the motion detector input If this value is not equal to 0, the motion detector is used to turn off the zone independent of (TH). T5) are affectedĪutomatic shutdown of the zone after the end of the last movement When the input remains ON, the command is repeated at this interval (in seconds). If an input is ON longer than this time in seconds the command is repeated. Volume step size when adjusting using Vol +/. If you do not want to use a double click enter 0 in this field.
This output is only visible in certain configurations.Īctivated by reset input (R) or double click The sleep timer is reset when switching off the zone (Off, Pause, Stop, R).Īnalogue Output - Value indicating remaining duration on sleep timer Zone is muted and switched off after duration specified in Ts Whilst the alarm input is active, all other inputs are disabledĪctivates playback of fire alarm with the volume set in parameter VaĪctivates playback of doorbell with the volume set in parameter VbeĪctivates playback of alarm clock with the volume set in parameter Vbu Does not affect the automatic switch-off with parameter MT.Īctivates playback of burglar alarm with the volume set in parameter Va Prevents the music from coming on via Mo. The name of the connected sensor is used in the user interface.Ĭhild lock - disables all inputs, but not user interface Double click on key 3 switches the zone off (see parameter Roff). Motion sensor, starts playback of currently selected playlist When playing a playlist, pressing Play will resume playback at the current position of the title.Īnalogue Input - Value to indicate repeat stateĠ = Off, 1 = Repeat Continuously, 2 = Repeat Once Loxone Music Server Gen 2: Next zone favorite If a user-defined selection was made last, the first zone favourite is played. When playing a playlist, pressing Play will restart playback at the beginning of the title.ĭouble click selects the next zone favourite This input is only visible in certain configurations.ĭigital Input - Single pulse turns zone off In order to use the "Music Server Zone" function block, a Music Server must first be commissioned and created in Loxone Config.ĭigital Input - Single pulse turns zone on
0 kommentar(er)
